Untitled_Artwork (3).png
Untitled_Artwork (4).png
Untitled_Artwork (4).png
Untitled_Artwork (3).png


  • Safe Paintwork Decontamination including...

  • Pressure washer rinse followed by a Pre-wash foam to loosen and remove heavy dirt & grime with a pressure washer before the contact wash.

  • Followed by the Double Bucket method, allowing the wash mitt to be rinsed after making contact, removing dirt & grime from the wash mitt before re dunking in the soap bucket. Accompanied with bucket grit guards holding dirt & grime at the bottom of the bucket away from the wash mitt. Reducing abrasions on paintwork.

  • Ph Neutral Auto Glym Conditioner enhancing the durability of paintwork protection previously applied.

  • Fallout remover applied to paintwork, lifting iron oxide particles out of the paintwork after being left to dwell.

  • Tar & Glue remover is then applied to remove deeply embedded Tree Sap & Tar spots.

  • The decontamination stage is the most important stage when applying Paint sealants, having a clean top layer of lacquer allows the product to bond with the paintwork and not the contaminants. Allowing a durable and Flawless Result.

  • The vehicle is then dried with an Automotive blower removing all stagnant water in cracks & crevasses leaving the car completely dry avoiding watermarks.

  • The Paintwork is finished with a 12 month Synthetic Paint Sealant, introducing a high gloss hydrophobic finish to the Paintwork. 

  • Coatings allow automotive pre wash's to act more effectively removing heavy dirt & grime build-up for contact wash and allows the wash mitt to glide across the paintwork when maintaining the car bringing a mirror finish shine with little pressure on the paint, it also allows the paint to be dried efficiently with the correct equipment, these benefits avoid major defects on paintwork.

Glass & Seals

  • All exterior glass cleaned with the paintwork followed by applying a long lasting hydrophobic coating allowing a high shine finish time and time again & allowing the glass to repel water in a hydrophobic fashion.

  • The glass is then cleaned with ammonia free glass cleaner leaving a streak free finish.

  • Window seals are agitated with relevant detailing brush's and all purpose cleaner removing contaminants & the opportunity for bacteria growth inside the car. 

  • All rubber seals are then coated in a rubber sealant, left to cure for 5 minutes followed up by removing the excess with a dry microfiber towel. Avoiding the seals shrinking in the sun and cracking in the near future.

Wheels & Arches

  • Separate "wheel" bucket with brake dust dissolving  Shampoo, including all relevant brushes.

  • Alloy Wheels are rinsed, left to dwell in Pre Wash Foam then rinsed with a pressure washer reducing scratches with metal shavings & dust from the brakes. 

  • Arches sprayed with all purpose cleaner rinsed then re sprayed to be agitated with an wheel arch brush.

  • Brake callipers cleaned with non corrosive cleaner.

  • Inner Wheel Barrels foamed then worked free of brake dust with barrel brushes. (Results depending on corrosion from brake dust & accessibility.

  • Wheel Facing cleaned with soft alloy wheel brush followed by a once over with a microfibre from the wheel bucket to ensure quality.

  • Tire walls are rinsed with the pressure washer then agitated with a tire brush.

  • Callipers coated in protective sealant if painted.

  • The Wheels are then coated with an Alloy wheel coating in the barrels and the facing, left  to cure then buffed with a dry towel on the facing, leaving the barrels excess wax for extra protection.

  • Tires are then coated with a long lasting tire sealant with the option of matte of shiny.

  • Alloy Wheels are then dried with a Heated Automotive Blower.

Untitled_Artwork (1).png
Untitled_Artwork (4).png
Untitled_Artwork (4).png


Untitled_Artwork (3).png

Interior Paintwork

  • Paintwork concealed behind doors & boot lid flushed, cleaned & coated, leaving a glossy hydrophobic finish allowing water to pass through easily. (Excess service grease removed)

Interior Trim, Dashboard & Steering Wheel

  • Interior trim, dashboard, centre console, door cards dusted & cleared of loose debris, before cleaning agents applied.

  • Interior Crevices are blown out with steam accompanied by relevant brushes.

  • Automotive Universal Cleaner paired with our steamer  reveals a factory new finish on interior vinyl & plastic, releasing all imbedded dirt at regulated heated temperatures, leaving a completely sanitised surface.

  • Interior Screens and Speedometer cleaned with ammonia free glass cleaner to a spotless finish.

  • Steering Wheel sprayed with Automotive universal cleaner steamed to release oils & contaminants, agitated with relevant detailing brushes steamed once again and then buffed until dry.

  • Alcantara is agitated with a soft brush using relevant fabric cleaner, dried with a microfibre cloth, then vacuumed from a short distance to bring fabric hairs back up.

  •  At Auto Reset we do not apply and silicone based products on interior vinyl, plastic or leather.


  1. All floor  mats and boot liner removed,

  2. Carpets vacuumed then assessed for spots & stains.

  3. Then Sprayed with Automotive Carpet Cleaner, left to soak for five minutes then agitated steamer with a carpet brush attachment, this removes light stains in carpets with minimal moisture.

  4. Tougher stains and areas with excessive contaminants are then focused with an extraction hoover accompanied with Automotive Fabric Cleaner.

  5. Carpets are then inspected for inconsistency's, dried & finished with our wet & dry hoover.

Leather & Fabric Seats.

  • Leather

  1. Vacuumed with detailing brush to avoid damage from nozzle, seams opened and brushed out​

  2. Leather steamed with great care to whilst applying universal cleaner then agitated with a detailing brush.

  3. Seams then agitated with a damp detailing brush & steam

  4. Excess cleaning agent and contaminants removed with microfibre towel, then buffed dry with fresh microfibre.

  • Cloth

  1. Dry vacuumed & brushed to remove surface contaminants.

  2. Dampened with Automotive Fabric Cleaner & agitated using the steamer with a microfibre attachment.

  3. Deeply stained areas are soaked in Fabric cleaner, brushed, extracted then dried.